3
LTC
LTC
3
INSTALLATION LTC-07
(If your equipment model is LTC-07L, go to the next page)
Mounting the external speaker on glass
1. Clean the surface where the speaker is to be mounted
with alcohol to ensure a good adhesion.
2. Stick the mounting tapes to the back of
the speaker and remove the protective
layer from the tapes.
3. Secure the speaker to the glass by
pressing hard.
4. Pull the cable carefully to maximize its
length and to ensure a good presentation
of the installation without cable slack.
5. Introduce the upper end of the tube to the
speaker and the lower end to the coupling.
2
3
5
5
4
6. Apply glue to the surface of the coupling and stick to the glass.
Glass
7. Place the round sticker on the inner side of the glass, so
that the sticker covers the mounting tapes.
