![background image](http://html1.mh-extra.com/html/bandelin/sonorex-technik-w-300/sonorex-technik-w-300_instructions-for-use-manual_470806024.webp)
24 / 32
23486a GB/2017-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
6.4.3 Exchanging fuses
CAUTION!
Repair work may only be carried out by authorised, quali
fi
ed personnel or by the
manufacturer. The manufacturer assumes no liability for unauthorised interventions on
the ultrasonic bath!
The mains plug must be pulled out before opening the ultrasonic bath!
There is a risk of electric shock from live parts in the ultrasonic bath!
Empty the ultrasonic bath and disconnect from the mains.
Carefully place it on its back side. Be careful not to bend the mains cable. We
recommend that a pair of wooden slats be placed under the tank while the
replacement process is taking place.
Unscrew the base plate, loosen it and open it.
The fuses are located
W65: on the generator circuit board.
W 300: in the fuse switch disconnectors and on the power modules.
After inspection, replace only the defective fuses. The fuse values are listed under
"Technical Data".
Reassemble the ultrasonic bath following the reverse order.
Turn the bath upright and reconnect the mains plug.
The ultrasonic bath is ready for operation once again.
Summary of Contents for SONOREX TECHNIK W 300
Page 29: ......