Sonication liquid
Insert basket
14 / 30
23906-000 en/2022-11
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
4 Use
Sonication or rinsing always take place directly in the tank.
For this purpose, the objects are placed in a basket and hung
inside the tank which is
fi
lled with bath liquid.
4.1
Instructions for use
Notes - Filling
• Verify that the ball valve is closed.
• Ultrasound and heating must be turned o
ff
.
• Do not
fi
ll oscillating tank with hot water. Maximum
fi
lling temperature: 50 °C.
• Water of at least drinking quality must be used to
fi
ll the oscillating tank.
• Water without additives is not suited for sonication. BANDELIN recommends
TICKOPUR or STAMMOPUR preparations.
• The
fi
ll level must always be at or slightly above the
fi
lling level mark.
A low
fi
ll level will damage the ultrasonic bath!
• Do not use any combustible, explosive, non-aqueous
fl
uids or azeotropic mixtures
directly in the stainless steel oscillating tank (e.g. benzine, solvents). Furthermore,
chemicals that contain or that separate chloride ions (some disinfectants, household
cleaners, and dish detergents), may not be used directly in the stainless steel tank.
• When using strongly acidic agents, the hard chromium plating of the ball valve
could become corroded and the ball valve start to leak. If the use of a strongly
acidic cleaning agent cannot be avoided, the use of a stainless steel ball valve is
recommended.
• When using preparations, the safety instructions included in the product lea
fl
ets are
to be fundamentally adhered to.
• Replace used sonication
fl
uids, do not refresh by adding more liquid.
Notes - Inserting objects
• Fully remove air bubbles from cavities (e.g. blind holes).
