![background image](http://html1.mh-extra.com/html/bandelin/sonorex-cnp-28-2/sonorex-cnp-28-2_operating-instructions-manual_3786461037.webp)
Documentation for SONOREX CNp 28-2
BANDELIN electronic GmbH & Co. KG, Heinrichstraße 3-4, 12207 Berlin, Germany Page 31 from 55
6.4
Activate cleaning programme
WARNING
Dangers due to crushing hazard
The lid rests on the bath when it is closed. If the lid is closed carelessly, the
force of gravity can cause crushing.
Do not let go of the lid until it is completely deposited. Put the lid down
slowly.
After closing the lid, press the start button. The preset programme time runs out (Fig. 8).
Note: If heating is selected, the process can only be started after the minimum temperature has
been reached. This is indicated by a change in the colour of the temperature display (Fig. 8).
Figure 8: User interface
6.5
Interrupt cleaning programme
To stop the cleaning process prematurely, press the stop button. After the ventilation time, open
the lid and remove the items to be cleaned.
Settings menu
Bath designation
Temperature display
Programme time
Emptying selection
Vacuum selection
Ultrasonic selection
Heating selection
Stop button
Start button