18
Smart Pro
installation instructions
18. Opener Safety & Security
18.1 Your Door CAN NOT be used by the opener when:
a. There is a manual locking device installed.
b. There is a power failure.
18.2 Your Door CAN be used when:
a. There is an emergency by:
i. disengaging the Auto-lock (if fitted) and opener.
ii. disengaging the opener
b. There is a power failure by:
i. disengaging the Auto-lock (if fitted) and opener.
ii. disengaging the opener.
18.3 To Disengage the Opener:
a. It is recommended to do so with the door in the closed position.
b. Pull the manual release cord away from the door, until you hear
a click.
c. Move the door manually.
CAUTION: When the opener is manually
disengaged, the door is no longer locked. To lock
the door manually, re-engage the opener after the
door is closed.
19. Operating your Opener
19.1 To Operate the opener:
a. Press the programmed transmitter button until your
door begins to move (usually 2 seconds). Make
sure you can see the door when you use the
transmitter.
b. If you are in a vehicle you should aim the
transmitter through your windscreen as shown.
c. Check that the door is fully open or closed before
you drive in or away.
d. If you press the transmitter whilst the door is
moving the door will stop. The next press of the
transmitter will move the door in the opposite
direction.
WARNING! When operating the
manual release (while the door is
open) the door may fall rapidly due
to weak or broken springs, or due to
being improperly balanced.
Do not disengage the opener to
manual operation with children/
persons or any objects including
motor vehicles within the doorway.
CAUTION: Do not use the string handle as a
mechanism to open the door. Failure to comply
may cause serious injury.
18.4 To Re-Engage the Opener:
a. Check the door has not been locked by a locking
device.
b. Pull the manual release cord away from the door,
until you hear a click.
c. The door will now operate from the opener.
