Default value: 2
Parameter range: 1-5
◦
C (2-9
◦
F)
Precision: 1
◦
C
With electrical heating with 2 resistor groups, the hysteresis only affects the second group, while
the first is controlled in the usual manner.
6.7.5
Stop Temperature
This setting establishes the maximum stop temperature of the machine, TA. Refer to Section 5.1 on
page 20.
The current value is shown on the TEMP display, while 0 is shown on the VIT display.
Default value: 80
Parameter range: 1-180
◦
C (34-356
◦
F)
Precision: 1
◦
C
6.7.6
Heating Type
This setting establishes whether the heating is electrical, steam or gas.
The current value is shown on the TEMP display, while C is shown on the VIT display.
Default value: EL
Available values: Electrical or Steam heating (EL.) / Gas heating (GAS)
32
