Driver Software Installation
12
Chapter 3
Document Number 3PCI-0712m
Pre-Installation Steps
1.
Configure the port(s) on the card for the desired mode (RS-232, RS-422 or
RS-485) using the three DIP switches on the card.
2.
If configuring for RS-422 or RS-485 Modes, and bias or termination resistors
are needed, add them at this time.
Note:
Refer to Chapter 2 of information on DIP switch settings and
bias/termination resistors.
3.
Install the card in the slot. Use appropriate ESD handling precautions.
4.
Power up the computer
5.
Insert your driver disc in the CD-ROM drive.
Using the Found New Hardware Wizard
Windows will detect the PCI card and start the
Found New Hardware Wizard
to begin
the driver installation. Driver software (on CD-ROM) is provided with your MIport card.
Do not connect to Windows Update to search for software.
6.
Select
No, not at this time
and click
Next.
PCI Card Software Installation
Once the new hardware has been detected, the wizard will proceed to install
the software for the card. The following dialog box will appear:
7.
To begin the installation of the software for the PCI card, click
Install the
software automatically.
Click
Next.
Windows will find the appropriate files on the CD, then display a dialog box
concerning Window Logo testing for Vista. This feature of Vista simply
indicates that these drivers have not yet undergone the Microsoft testing
procedure required to use the Windows Vista Logo on the packaging. Diver
compatibility is not affected.
8.
Click
Continue Anyway.
A dialog box will appear indicating the software installation is proceeding.
9.
When the
Completing the Found New Hardware Wizard
dialog appears,
click
Finish.
Port Driver Installation
The Welcome to the Found New Hardware Wizard will appear again, indicating it has
detected a port on the PCI card. Repeat the steps above to install the port driver
software.
If the cared you are installing has more than one port, Windows Vista will find each port
in sequence and re-launch the
Found New Hardware Wizard
for each port. Repeat the
previous steps for each port.
Checking the Driver Installation