Documentation Number 232PCC23799 Manual
3
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353-91-792444 – Fax +353-91-792445
Chapter 2: DOS / Windows 3.x Installation
Two configuration software programs are provided with the
232PCC2: a Client Driver, DSP100CL.SYS, and a card Enabler,
DSP100EN.EXE. Both of these programs are executed from DOS
(before entering Windows) and allow operation of the 232PCC2 in
both the DOS and Windows 3.x environments. For optimal
operation, however, the Client Driver is the preferred method of
installation and configuration. The table below highlights the
differences between these programs.
Table 1. Client Driver vs. Enabler for DOS/Windows 3.x.
Card and Socket Services software is commercially available
from several vendors for most desktop and laptop PCs. If you are
unsure whether Card and Socket Services software is currently
installed on your system, install the 232PCC2 Client Driver as
discussed in following section. When loaded, the Client Driver will
display an error message if Card and Socket Services software is
not detected.
Client Driver
(recommended)
Enabler
File name: DSP100CL.SYS
File name: DSP100EN.EXE
File type: DOS device driver
File type: DOS executable
Interfaces to PCMCIA Card and Socket
Services software (PCMCIA host
adapter independent)
Interfaces directly to Intel
82365SL and other PCIC
compatible PCMCIA host
adapters
Allows automatic configuration of
232PCC2 adapters upon insertion (Hot
Swapping)
Does not support automatic
configuration of 232PCC2
adapters upon insertion (Hot
Swapping)
Requires PCMCIA Card and Socket
Services software
Does not require PCMCIA Card
and Socket Services software
