28
NAVIGATING THE CONFI GURATION MENU
On initial power-up there are four sections in the MES1A/B configuration menu. A
fifth menu item appears if you are configuring a Modbus Master device. The menu
items are:
6.
Network/IP Settings
7.
Serial & Mode Settings
8.
Modem/Configurable Pin Settings
9.
Advanced Modbus Protocol Settings
The following menu item 5) appears if the
MES1A/B is configured as a Modbus Master in
section 2) Serial Protocol
10.
Unit ID to IP Address Table
Each section of the configuration menu includes several parameters.
11.
Begin the configuration by typing the menu section number at the
Select Command or parameter set (1..4) to change:
prompt.
The first configuration parameter of the section will appear at the
bottom of the pane. The current setting is shown in brackets.
Example: