5. ROUTER DESIGN
5.8.6
Reset
It is important to distinguish between reset and reboot the router.
Action
Router behavior
Invoking events
Reboot
Turn off and then turn on router
Disconnect and connect the power,
Press the
Reboot
button in the web
configuration
Reset
Restore default configuration and reboot
the router
Press RST button
Table 7: Description of reset and restart router
After green LED starts to blink it is possible to restore initial settings of the router by press-
ing button RST on front panel. After press button RST it is restoration of default configuration
and reboot (green LED will be on).
For pressing the RST button could be used a narrow screwdriver.
Figure 28: Router reset
We recommend to backup your router configuration (see Configuration manual), because
after reset router set configuration to the initial state.
17