Documentation Number 3PCIOSD1x-3903m Manual
Chapter 3
29
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
12. Verify 1 new COM Port. (shown here as COM5)
If you have 1 new COM port, the installation is complete. Select the
port, select Settings, Advanced. You should obtain the message,
"There are no user configurable Advanced I/O parameters for this
COM port."
Check the port with your software or with a Loopback test.
NOTE: In the above example, a serial mouse is connected to the
port which would usually be COM1. NT does not show it. COM2 is
the second built-in serial port.
continued next page
30
Chapter 3
Documentation Number 3PCIOSD1x-3903m Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445
You can check details of the serial card setup using
Windows NT
Diagnostics
, found under
Administrative Tools
. This can show the
Resources
used such as addresses and IRQ.
Windows Diagnostics will not allow changing anything.
The above shows one port using PCI card interrupt.
continued next page
