232XS2497 Manual
17
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5109
The Baud Rate is the speed at which communication takes place
between the PC and the Smart Switch. It must be specified so that it is
equal to SW1 – positions 1 – 3 on the Smart Switch.
The Number of Data Bits is the length of each character that gets sent
from the PC to the Smart Switch. This value must be specified so that it is
equal to SW1 – position 4 on the Smart Switch.
The
Module must be set so that it is equal to the Smart Switch Module
which you are using (i.e. PortMUX if you are using a PortMUX).
The User Defined Character must be set so that it is equal to SW2 on
the Smart Switch.
