![background image](http://html1.mh-extra.com/html/bandb-armr/lxl-15vp-hs/lxl-15vp-hs_installation-manual_459656026.webp)
Installation and Operations Manual
— LXL Gate Operator
26
B&B ARMR
A Division of B&B Roadway and Security Solutions 0054-9001UL Revision A2
9
1 amp fuse (processor protection)
10
Factory connections
7. Secondary Safety Devices
Connecting safety devices to the secondary safety connectors will stop the gate on the detection
of the safety and proceed in the event of clearing the safety. To reverse the gate on the event of a
safety, you must connect the safety device to the loopsafe terminal on connector 3.
*Note: The ROAD and BACK connections are normally open connections
UL Approved Secondary Safety Devices:
Miller Edge
- manufacturer of contact sensors for all types of gates (800-220-EDGE).
website: http://www.milleredge.com
EMX Industries
- manufacturer of non-contact sensors for gates (800-426-9912).
website: http://
www.emxinc.com
IMPORTANT
NOTE:
UL 325 approved secondary
safety devices MUST be
used for the gate installation
to comply with the
requirements of UL 325.
Refer to the UL
approved
manufacturer’s
documentation for proper
installation of secondary
safety devices.