INSTALLATION
MANUAL
MODEL 773 SERIES
REINFORCED CRASH ARM
B&B ARMR: A Division of B&B Roadway and Security Solutions
Page 5 of 38
0773-9001 Rev D
B&B ARMR reserves the right to change any information concerning product or specification without notice or obligation.
DO NOT DISCARD THIS MANUAL!
1.
INTRODUCTION
1.1.
Preface
Welcome!
Congratulations on your purchase of a B&B ARMR vehicle barrier. In addition to providing detailed operating
instructions, this manual describes how to install, start-up and troubleshoot your vehicle barrier. This manual
should be fully reviewed in advance of any actual work being done on the equipment.
If you require additional assistance with any aspect of your vehicle barrier's installation or operation, please
contact B&B before proceeding.
With years of experience in all aspects of perimeter security and related disciplines, our products are used
throughout the world to control access and to protect people, equipment, and facilities. We offer a broad range
of vehicle barrier and related perimeter security services:
Turnkey installations.
Routine barrier preventative maintenance or emergency repairs (including work on non-B&B products).
Spare or replacement parts.
Custom designs or special installations.
Equipment upgrades or modernization.
Ancillary security equipment such as security guard enclosures, access control points, security lighting, and
many other security related products.
Technical support via telephone and possible on-site support with advanced scheduling.
The equipment covered by this manual is available with a vast variety of options and accessories. See the
Specification Chart at the end of this manual for general unit specifications. Consult the unit labels, approved
submittal package, order acknowledgment and other manuals for details on the options, accessories and related
specifications provided with the equipment on each project.
The instructions pertaining to the Model 773 Reinforced Crash Arms are intended as a guide and do not
supersede local or national codes. Consult local codes before installation.
1.2.
Safety Considerations
B&B does not assume responsibility for injury to persons or property during installation, operation, or
maintenance. As the installer, you are responsible for correct, safe installation and first operation of this
equipment. You must follow the specific instructions and safety precautions located in this manual. In addition,
you shall:
Follow the safety standards of the Occupational Safety and Health Administration (OSHA), as well as other
applicable federal, state, and local safety regulations and industry standards and procedures.
For installation outside the United States, installers must also follow applicable international, regional and
local safety standards.
Engage only trained and experienced staff to install and operate the equipment.
Ensure that any modifications or repairs are performed correctly, using the correct tools and equipment, by
properly trained technicians.
