background image

Installation and Operations Manual 

— Model 730 Series 

INTRODUCTION 

B&B ARMR

                                                                                                                  

A Division of B&B Roadway and Security Solutions        

                                                                                            

0730-9001 Revision C2 

 

 

INTRODUCTION 

Welcome! 

Congratulations on your purchase of a B&B ARMR vehicle barrier.  In addition to 
providing detailed operating instructions, this manual describes how to install, maintain, 
and troubleshoot your vehicle barrier.   If you require additional assistance with any 
aspect of your vehicle barrier's installation or operation, please contact us.  
 
With years of experience in all aspects of perimeter security and related disciplines, our 
products are used throughout the world to control access and to protect people, 
equipment, and facilities. We offer a broad range of vehicle barrier and related security 
services: 

 

 

Turnkey installations 

 

 

Routine barrier preventative maintenance or emergency repairs (including 
work on non-B&B ARMR products) 

 

 

Spare or replacement parts 

 

 

Custom designs or special installations 

 

 

Equipment upgrades (modernize your old equipment with state-of-the-art 
hydraulics and control systems) 

 

 

Ancillary security equipment such as security guard enclosures, card readers, 
security lighting, and many other security related products. 

 

 

Technical support via telephone and possible on site support with advanced 
scheduling. 

Safety 

 

 
 
 
 

 

Your safety is extremely important to us.  If you have any 
questions or are in doubt about any aspect of the equipment, 
please contact us. 

Summary of Contents for 730 Series














Reviews: