GRSM17
Pneumatic
Center Punch
Tool
Important:
For proper tool performance, follow air requirements for GRSM17:
Line Pressure – 70 psi minimum,120 psi maximum
Volume - 3-5 CFM
Air Delivery system - ¼”minimum diameter air line with a ¼” N.P.T. connection.
Filtration – Follow typical filtration requirements of air operated equipment. The BAND-IT
supplied system includes a filter and lubricator.
Lubrication - Use DTE 24 hydraulic oil (BAND-IT part # S31589), oil drip-rate is verified by
cycling the machine. If one drop falls in sight glass within 10-25 cycles, the lubricator is
correctly adjusted. Excess oil will not benefit tool life and may lead to blockage of air
mufflers and a dirty environment.
Solvents - Liquids such as solvents or cleaners should never be added to the air system
through air lines.
Air System
Requirements
Oil drip rate
Document# P47050 Rev. -
© Copyright
BAND-IT-IDEX, Inc. 2008
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-3070 USA
P: 1-800-525-0758 F: 1-800-624-3925
4
View of the back side of the GRSM17 showing the supplemental
(included) filtering and lubrication system as well as the ¼” N.P.T.
air connection with a typical quick connect coupling.
Air connection
Oil drip rate
adjustment knob
Oil fill location
Caution!
Disconnect air
supply before
removing plug.
Warning:
The lubricator should be refilled with DTE 24 hydraulic
oil only. The use of other oils may cause damage to the system.