Check using the chart below before returning your Mad Shark for repair as many problems can be easily solved
11.1V LiPo
Please observe the following warnings.
DURING OPERATION
● The transmitter’s range will vary depending on your surroundings and battery strength.Do not
operate Mad Shark too far away or control will be lost.
● Ensure that all batteries are correctly installed and that the 11.1V LiPo is fully charged.
● Do not operate your Mad Shark in areas with strong currents, in salt water or areas of water with
large waves.
● Do not touch moving parts during operation, especially the propeller.
● Do not let your Mad Shark runs aground, as this can cause damage.
● If you lose control of your Mad Shark , never wade into deep water or water with strong currents to
retrieve it. First, hold the transmitter as high as you can to try to re-establish control. If this does not
work, find another way to move closer to the model, but do not endanger yourself in the process!
CAUTION!
TROUBLESHOOTING
To Purchase Spare Parts or for Technical Assistance,Visit www.motionrc.com
or www.motionrc.eu
Mad Shark V2 2.4GHz ARTR Brushless Mini F1 Speed Boat V2
BNC1032-100
Bancroft Mad Shark Brushless Motor
BNC1032-101
Bancroft Mad Shark Deck(Red) & Water Proof Gasket With Plastic Lock Set
BNC1032-104
Bancroft Flex Shaft Set For Mad Shark
BNC1032-102
Bancroft Scale Outboard Engine And Rudder Set
BNC5077-002
Bancroft P1.4X35mm Φ3.1mm Two BLade Nylon Propeller (Pk2)
BNC1032-103
Bancroft Two Bearing Inside Rear Shaft Strut
BNC6024-003
Bancroft 11.1V 1300Mah 35C Lipo Pack With XT-60 Plug
BNC6026-003
Bancroft 2S/3S Balance Charger & EU Plug AC Power Cable
BNC6026-002
Bancroft 2S/3S Balance Charger & US Plug AC Power Cable
BNC5015-001
Bancroft Water Cooling Motor Mount Set
BNC5059-002
Bancroft Aluminium Alloy Coupler W/3 Screws
BNC5072-002
Bancroft Deck Plastic Lock Set
BNC6003-001
Bancroft 30A Water Cooled Brushless ESC With XT-60 Plug
BNC6008-004
Bancroft J2C93 2.4GHz 2Ch Transmitter
BNC6010-302
Bancroft J2C91R 2.4GHz 4Ch Receiver