RECEIVER CONNECTION DIAGRAM
TRANSMITTER/RECEIVER BINDING
3
3. Place the boat hull on the polyfoam boat
stand
4. Fixt the charged finished battery inside the
hull with velco strap.
5. Attach battery connector to the matching
connector of ESC.
6. Receiver’s light glow green, ESC will mak
e sound of “ BE, BE, BE”.
7. Re-position hatch by rotating plastic locks
at the hatch firstly, then rotate the plastic
lock underneath the boat head.
NOTE:
1. There is a water proof rubber ring placed inside the slot of hull, always make sure it’s secured
positioned before re-position the hatch.
7
6
3
4
5
BE BE BE
The binding process effectively ties the transmitter and receiver together. Under normal circumstances,
both items are supplied like this from the factory. If, however, you find that your transmitter and receiver
are not bound(receiver’s red LED is on), you should do the following:
1) Switch “ON” the transmitter.
2) Switch “ON” the receiver by connecting battery to ESC,
and ESC cord is plug into Receiver properly(Note:ESC
has BEC function).
3) Press down the “BIND” button on the receiver, the
receiver’s green LED will be on to indicate that binding
has been successful and the receiver will now accept
commands from the transmitter.
Note 1: During binding process, transmitter and receiver should be no more than one meter apart
and no other similar devices should be within 10 meters.
Note 2: if the green light flashing, showing the binding failure, please do again as above indication.
Caution: Before racing boat,
Please use ballon supplied
in tool bag to wrap receiver
for water proof
Note: If ESC with BEC function, no need to connect battery with receiver.
BATT.(6V)
THROTTE
SERVO
ESC
Mad Shark V2 2.4GHz ARTR Brushless Mini F1 Speed Boat