BPI-R1 User Manual
http://www.banana-pi.com
http://www.sinovoip.com.cn
2
The BPI- R1 is a 300Mbps Wireless N Router with both wired and wireless network
connections designed specifically for smart home networking use. With 2T2R MIMO
Technology and two detachable antennas, the R1 is the dual core Android 4.2 product which
more better than Linux product. It can run with Android 4.2.2 smoothly and with Gigabit
ethernet port, SATA Socket, it can easily run with the game and support 1080P high definition
video output.
Hardware specification
CPU
A20 ARM Cortex™-A7 Dual-Core
GPU
ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory (SDRAM)
1GB DDR3 (shared with GPU)
Onboard Storage
Micro SD (Max. 64GB) card slot UP to 2T on 2.5 SATA disk
Onboard Network
10/100/1000 Ethernet RJ45, WLAN @802.11b/g/n
Video Input
A CSI input connector allows for the connection of a designed camera
module
Video Outputs
HDMI , LVDS/RGB
Audio Output
Audio Input
3.5 mm Jack and HDMI
Microphone
Power Source
5 volt via Micro USB(DC In Only)
USB 2.0 Ports
USB Host and Micro USB (OTG)
Buttons
Reset button: Next to Power button
Power button: Next to Battery connector
GPIO(2X13) pin
GPIO,UART,I2C bus ,SPI bus with two chip selects,
CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED
Power Key & RJ45
Remote
IR
OS
Android 4.2, Linux
Interface definition
Product size
148 mm × 100mm
Weight
83g
