background image

Adjustable parameters

ON-Time

As long as the set ON time is running, the contact of output relay 4 is closed.
Setting range: 1 second to 24 hours (factory setting: 0)

Available setting values:
0, 1, 2, 5, 10, 30 seconds: No decimal point lights up.
1, 2, 5, 10, 30 minutes: The right decimal point lights up.

1, 2, 3, 6, 12, 24 hours: The middle decimal point lights up

OFF-Time

As long as the set OFF time is running, the contact of output relay 4 is open.

Setting values as for "ON-Time", factory setting: 0

Note:

After a power failure (unit reboots), the programme starts with the ON time.

If one of the times is adjusted during operation, this setting is effective immediately.

Hold function

When using the clock for ventilation control, it is advisable to use the hold function.
The hold function can be activated in the timer menu.

This makes it possible to hold the last measured value during the aeration process (relay 4 energised) until the aeration is finished.
Available setting values:
HoF: Hold function switched off (factory setting)

Hon: Hold function switched on
The hold function has no effect if one of the timer times is set to 0.

CALIBRATION OF THE ZERO POINT

1.) Remove MEMPRO S6.6 / MEMPRO C S6.6 or empty tank completely!

2) In menu "t1", press the rotary/push switch for approx. 3 seconds until the LED display "circles".

The current fill level is set to 0 and permanently saved.

MAINTENANCE

When used as intended, the MEMPRO S6.6 / MEMPRO C S6.6 operates maintenance-free.

In case of strongly adhering liquids (e.g. milk of lime), the measuring tube or the measuring hose should be checked and cleaned at regular
intervals!

RESET TO FACTORY SETTING

1.) Switch on the power supply!
2) Within 3 seconds (during the test routine) hold down the rotary/push switch for approx. 5 seconds!

The display counts up 1, 2, 3, 4...99, hrs.
All setting values are reset to the factory setting (default values).

LEV

05-09-2023

M-592.03-EN-AB

592-03

/5

HYDROSTATIC MULTIPLE

LIMIT VALUE SWITCH

MEMPRO S6.6

22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL

Tel

Fax

+33 (0)1 30 25 83 20

+33 (0)1 34 10 16 05

Web

E-mail

www.bamo.eu

[email protected]

INTERNATIONAL

Reviews: