FIG. 11
Panel functions:
(POWER) ON/OFF TEMP/TIME
START/STOP FAN SWITCH
Using the appliance
1.
Turn over the base, set the fan
②
into the trough, and then close the cover
③
. (Fig.2)
Attention: Check if the fan is settled in the base before using.
2.
Set the drip tray in the base. (Fig.3)
3.
Put the Heat Shield
⑤
on the base. (Fig.4)
Noted: The arrow mark on the Heat shield should direct at the arrow mark on the base.
4.
Hold the handle (L) and (R) to take out the grill plat. (Fig.5)
5.
(Fig.6) “a” is the safety interlock switch, “b” is heat protection silica gel. (4pcs)
6.
(Fig.7) This Part is fan
②
, can be departed from the base for cleaning, place “c” is silica gel,
place “e” is wind wheel.
Noted: Whole Part
②
cannot be dipped into water to wash. About the wind wheel (place
“e”), flush it after spurting depurative, then make the motor (place “d”) become dry.
7.
0.5L water should be pour into the drip tray when use the grill. (Fig.8)
8.
At the grill plate there has two handles (place “f”), use it after cooling, (Fig.9)
9.
Covering glass covers makes barbecue faster and has no fumes when baking thicker
ingredients. Hold the glass cover handle (place "g"). (Fig.10)
