background image

 

 

 
 
Read  this  important  information  carefully  before  you  use  the 
appliance and save it for future reference. 

 
 

Danger 

-    Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. 

 

Warning 

-    Please  ensure  the  voltage  indicated  on  the  appliance  corresponds  to  the  local  mains 

voltage before connecting the appliance. 

-    Never connect this appliance to a timer switch in order to avoid any hazardous situation. 
-    Do not use the appliance if the mains cord, plug or other parts are damaged. 
-    If  the  mains  cord  is  damaged,  please  have  it  replaced  by  supplier,  a  service  center 

authorized by supplier or similarly qualified persons in order to avoid a hazard. 

-    This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. 

-    Children should be supervised to ensure that they do not play with the appliance. 
-    Never let the appliance run unattended. 
-    Never use fingers or an object (e.g. a spatula) to push ingredients down the feeding tube 

while the appliance is running. Only use the pusher for this purpose. 

-    Be very careful when handling the discs, blender blade unit or food processor blade unit. Be 

especially careful when removing them from the food processor bowl or blender jar, when 
emptying the bowl or jar and when cleaning them. The cutting edges are very sharp. 

 

Caution 

-    Never switch off the appliance by turning the blender jar, the food processor bowl or the 

juicer bowl. Always switch off the appliance by turning the speed control knob to OFF. 

-    Switch off the appliance before detaching any accessories. 
-    Unplug the appliance immediately after use. 
-    Always unplug the appliance before reaching into the blender jar with fingers or an object 

(e.g. a spatula). 

-    Wait until moving parts stop running before removing the lid of the bowls or jar. 
-    Use only the original accessories or parts from the supplier. Otherwise, the guarantee will 

become invalid. 

-    Do not put ingredients exceed the maximum content indicated on the food processor bowl 

or the blender jar.   

-    Do not use the juicer if the sieve is damaged. 
-    Read the table in this user manual for the maximum capacities and processing times for 

different accessories. 

-    Clean the parts that comes into contact with food thoroughly before using the appliance for 

the first time. 

-    Let hot ingredients cool down before processing them (max. temperature 80°C/175°F). 

 

Summary of Contents for EF409














Reviews: