baltur TBML 2000 ME, Instruction Manual For Installation, Use And Maintenance

Page: 61 / 88

DESCRIPTION OF OPERATION WITH LIQUID
FUEL
The burner operates fully automatically: it is activated by switching on
the main switch and the control panel switch.
Burner operation is managed by command and control electronic de -
vices.
The “lock-out” position is a safety position that the burner automatically
assumes when a burner or system component is not working properly.
Make sure that there are no faults in the heating plant before re-activa -
ting the burner by 'resetting it'.
The burner may stay in the lock position without any time limits.
To reset it, press the specific button (RESET).
Lock-outs may also be caused by temporary faults; in these cases if it
is reset, the burner will start up without any difficulties.
If lockings continue to occur (3-4 times), do not continue with the ope -
ration and, after having checked that the fuel arrives to the burner, ask
the intervention of the after-sales service in your area.
1
avvio_TBMLME
1 ENTER button
ELECTRODE DISK DISTANCE DIAGRAM
4
9 ÷ 9,5
20
25
6
0002960160
33
9 ÷ 9,5
A
A - Gas pilot tube positioning in front of nozzle
17 / 42
0006160409_202305
ENGLISH