baltur TBG 35P, Instruction Manual For Installation, Use And Maintenance

Page: 57 / 72

ENGLISH
21 / 34
0006160258_201802
CONTROL AND COMMAND EQUIPMENT LME...
OPERATION.
RED
YELLOW
GREEN
The reset button «EK...» is the main element to access all diagnostics
functions (activation and deactivation) and serves to unlock the command
and control device.
Both «LED» and «EK...» are positioned under the transparent button. Pressing this button, you reset the command and control equipment.
There are two diagnostics choices:
1. Visual indication directly on the reset button: operation and diagnostics of device status.
2. Diagnostics with interface: in this case the OCI400 connecting cable is necessary and it can be connected to a PC with ACS400
software, or to gas analysers of different manufacturers.
VISUAL INDICATION.
During operation, the command and control equipment phase is indicated on the reset button. The table lists all colour sequences and
their meaning. To activate the diagnostics function, hold the reset button down for at least 3 seconds. A quick red flashing indicates that
the function is active. Likewise, hold the reset button down for at least 3 seconds to deactivate the function (the switching will be indicated
with a flashing yellow light).
EK
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
> 3 s
7101z03e0305
Operating position
PC interface / diagnostic
analyser
Colour code table
Diagnostics
Operating position
COMMAND AND CONTROL DEVICE STATUS INDICATION.
Condition Colour sequence Colours
Waiting conditions TW, other intermediate conditions . . . . . . . . No light
Ignition phase Intermittent yellow
Correct operation, current strength of flame detector above the
minimum allowed
Green
Incorrect operation, current strength of flame detector below the
minimum allowed value
Intermittent green
Decrease in power supply voltage Alternating Yellow
and Red
Burner shut down condition Red
Fault indication (see colour key) Intermittent red
Extraneous light upon burner start-up Alternating Green
and Red
Quick flashing for diagnostics Quick flashing red
NO LIGHT. RED. YELLOW. GREEN.