baltur BT 75 DSNM-D, Instruction

Page: 2 / 40

2
Manufacturer’s declaration
We hereby declare that our gas, light oil, heavy oil, and combination (gas/light oil or gas/heavy oil)
burners are manufactured in conformance with current CE, CEI and UNI standards.
• BALTUR guarantees the “CE” certification provided that the burner is coupled to the “CE” gas train
supplied by BALTUR and the “CE” gas line accessories (on request).
NOTE: this declaration is not valid with regard to EC or UNI Standards for gas burners or the gas part of
duel-fuel burners (gas/light oil or gas/heavy oil) when such burners have been ordered in non-compliance
with the EC Standard or Italian UNI Standard because they are to be used for special purposes not provided
for in the above-mentioned standards.
L' Amministratore delegato
Dott. Riccardo Fava
· Read carefully the instructions before starting the burner and service it.
· The works on the burner and on the system have to be carried out only by competent people.
· The system electric feeding must be disconnected before starting working on it.
· If the woeks are not carried out correctly it is possible to cause dangerous accidents.
INDEX PAGE
- Technical data ........................................................................................................................................ “ 3
- Fuel feed plant ....................................................................................................................................... “ 8
- Application of the burner to boiler .......................................................................................................... “ 10
- Electric connections - Description of operation ...................................................................................... “ 11
- Ignition and regulation ............................................................................................................................ “ 16
- Combustion head setting - Setting the distance between disk and nozzle ............................................. “ 17
- How to use the burner - Maintenance .................................................................................................... “ 18
- Two - flame burner operation ................................................................................................................. “ 19
- Variants for burners provided qith steam pre-heater to heat the fuel oil ................................................ “ 20
- Air regulation servomotor SQN 30... - Air servomotor Conectron LKS 160... ....................................... “ 23
- Oil burner control devices ...................................................................................................................... “ 24
- Instruction for adjusting the electronic timer relay mod. “YDAV” ............................................................ “ 32
- Electric wiring diagram ........................................................................................................................... “ 33