baltur BT 100 DSNM-D, Instructions For Use Manual

Page: 51 / 76

N° 0002901610-T
13 / 36
98323_201501
ENGLISH
Control box
& relative
Programmer
LAL 1.25
Cyclic relay
Safety Time
in seconds
5
Pre-Ventilation & Oil
Pre-circulation Time
in seconds
22,5
Pre-ignition Time
in seconds
2,5
Post-ignition
Time
in seconds
5
Time between
1st and 2nd fla -
mes in seconds
20
Control box specifications
GENERAL DIAGRAM FOR TWO FLAME FUEL OIL BURNERS (MAGNET - NOZZLE WITHOUT PIN)
!
The burner is equipped with an air pressure switch
that does not permit the pump motor to operate if the
combustion air pressure supplied by the fan does not reach
the level at which the pressure switch has been set. The air
pressure switch must be set during burner ignition according
to the pressure level noted for 1st flame operation.
1 FILTER
2 BURNER PUMP (20÷22 bar)
3 PRESSURE GAUGE (0÷40 bar)
4 ATOMIZER UNIT
5 RETURN NOZZLE WITHOUT PIN
6 ROD WITH CLOSING PINS
7 BY-PASS HOLES
8 CLOUSING SPRING
9 OPENING ELECTROMAGNET
10 2
nd
STAGE PRESSURE REGULATOR (18-20 BAR)
11 1
st
STAGE PRESSURE REGULATOR (18-12 BAR)
12 AIR REGULATION SERVOMOTOR
13 AIR REGULATION SHUTTERS
14 FLEXIBLE PIPE
15 ELECTRIC PRE-HEATER
16 SELF-CLEANING 0.3 mm FILTER
17 THERMOMETER
18 MIN. PRE-HEATER THERMOSTAT
19 MAX. PRE-HEATER THERMOSTAT
20 PRE-HEATER ADJUSTER THERMOSTAT
21 NOZZLE RETURN THERMOSTAT
22 2
nd
STAGE ELECTROVALVE (USUALLY OPEN)