Baltic 165N, User Manual

Page: 13 / 69

13
REARMING BALTIC AUTOMATIC VERSION
1.
Unscrew the used cartridge anticlockwise 12 . Follow the illustrated instructions on the label
by the inflation mechanism. Replace the cartridge if it has been activated or if it has passed its
expiry date
8 , which is stamped on the side of the cartridge. For example, 11 2023 means
it must be replaced before November 2023.
2.
Refit the examined cartridge if ok if not screw in a new cartridge clockwise and tighten it by hand
until no threads are visible.
3.
Remove the cylinder retaining strap
6
and unscrew the CO
2
cylinder anticlockwise. Discard
the cylinder in an environmentally friendly manner. Check that the lever and the pin (visible at the
bottom of the valve head next to the CO
2
cylinder’s fastening)
13
can move freely, by pulling
on the activating cord. Place the lever in closed position and fit a new manual firing indicator clip
to lock it into position. 14
4.
Visually check that the O-ring in the bottom of the valve head, next to the CO
2
cylinder’s fastening,
is undamaged 13 .
5.
Screw in a new, clean and unpierced CO
2
cylinder using only hand force until absolutely tight.
REARMING BALTIC MANUAL VERSION
1.
Remove the cylinder retaining strap
6
and unscrew the CO
2
cylinder anticlockwise. Discard
the cylinder in an environmentally friendly manner. Check that the lever and the piercing pin
(visible at the bottom of the thread for the CO
2
cylinder 15 can move freely, by pulling on the
activating cord. Fold back the lever and secure it by pressing it against the valve head until it
clicks into place.
16
2.
Visually check that the O-ring in the bottom of the valve head, next to the CO
2
cylinder’s fastening,
is undamaged 15 .
3.
Screw in a new, clean and unpierced CO
2
cylinder using only hand force until absolutely tight.
Use no tools. Refit the cylinder retaining strap over the cylinder
6
.
When the CO
2
cylinder is mounted correctly, the indicator window should be green. 17
ENGLISH
6
7