Important:
Do NOT remove the pre-assembled mounting peg in the luminaire
head - it is needed to mount the luminaire head!
(Variant 1 - mounting the luminaire head using the mounting peg).
Mounting peg black
(pre-assembled).
EN
Mounting instructions - for the luminaire head
Rod
Control gear
(holds magnetically).
Spring cover
4b
4a
6
Mounting peg
(pre-assembled).
Once the luminaire is fully mounted and placed, it may be connected to the power supply.
Do NOT press the luminaire head down at its end - risk of breaking!
Mounting the luminaire head
variant 2
(w/o mounting peg):
Press and align the spring cover so that the hole in the stopper
is in line with the hole in the tube.
Slide the luminaire head onto the rod and position it at the
desired height.
5a
5b
6
6
5a
5b
Spring cover
5
Slide the luminaire
head onto the rod.
Main switch
Upper button:
On / Off / Dimming
Mounting the luminaire head
variant 1
(with mounting peg):
The luminaire head can be easily fitted onto the rod with the help
of the mounting peg.
Check the correct position of the black mounting peg in the tube’s
hole
-
it must be positioned precisely in this hole up to the limit
stop. (If the mounting peg is missing, the luminaire head has to be
mounted according to variant 2.)
4
4a
4b
4c
Align the luminaire head horizontally.
Mount the luminaire head carefully on top of the rod and slide
downwards; position the luminaire head at the desired height.
The mounting peg is pushed out of its original position in the
tube during this procedure and remains on the top end of the
rod. Remove the mounting peg.
4c
Tube
Do not connect the luminaire to the power supply
until it is fully mounted and placed.
15
