Baltech VP-3470, Operation Manual

Page: 44 / 88

44 General settings
BALTECH VP-3470
Operation manual
7.2. Connection of the vibration sensors
To ensure the correct measurement results make sure that the vibration sensor
parameters are set properly. The main parameter of the vibration sensor is the
sensitivity which is specified in the technical passport. The information about the
vibration sensor sensitivity is stored in the instrument and can be edited or deleted.
For this purpose use the SENSORS program (Figure 22).
Figure 23. Sensors menu
The procedure is described in the Table below.
Table 6. Setting and connection of the vibration sensors
Task Procedure Note
Connection of the
vibration sensor to the
Channel 1
Sensors > Channel 1
Select the sensor
from the list of
sensors (Figure 23)
Connection of the
vibration sensor to the
Channel 2
Sensors > Channel 2
Select the sensor
from the list of
sensors (Figure 24)
Adding of the
information about a
new vibration sensor
Sensors > Add
Enter the serial
number of the
vibration sensor and
its sensitivity which
is specified in the
technical passport
(Figure 25)
Editing of the
information about the
vibration sensor
Sensors > Edit
Edit the information
about the vibration
sensor (Figure 26,
Figure 27)