3
#90329
Assembly Diagram
Identify and Separate all the Parts and Hardware.
Illustration # 1
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
1.)
2.) Screw in two Locking Casters (A) into the bottom of the
Base (P2) at the front. Screw in two Casters (B) into the
bottom of Base (P-1) at the rear. The rear of the
Base (P-2) has two holes on the top as shown in
Illustration # 1. Tighten with Caster Wrench (C).
3.)
B
A
Illustration # 2
Insert the Pole (P1) into the Base (P2). Make sure you place the
end of the Pole that has the threaded insert into the Base as
shown in illustration #2. Attach the Pole (P-1) to the Base (P-2)
using four Screws (D). Tighten Screws with Allen Wrench (F).
Do not use unless all screws are tight. At least every six months, check all screws to be sure
they are tight. If parts are missing, broken, damaged, or worn, stop use of the product
until repairs are made by your dealer using factory authorized parts.
P2
B
Rear Leg
has Holes
D
P1
P2
Front Leg
Holes to Front
