LAP-2C
Assembly Diagram
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
1. Identify and Separate all the Parts and Hardware.
2. Attach Left Foot (P-3) on the end of Lower Reciever
(P-1) with drill hole using 3 Flat Head screws (C).
Attach Right Foot (P-2) on opposite end of Lower
Receiver (P-1) using 3 Flat Head screws (C).
(Do not tighten screws all the way.)
3. Insert 2 Locking Casters (H) and 2 Casters (J)
into Right Foot (P-2) and Left Foot (P-3) as
shown in illustration # 1.
P-11
A
P-4
P-9
F
P-6
P-5
D
B
5. Align Top Platform (P-6) and Accessory Shelf
(P-5) side by side as shown in illustration # 3.
6. Attach Upper Insert (P-4) to the Accessory
Shelf (P-5) using 4 Flat Head Screws (A) as
shown in illustration # 3.
7. Attach Top Platform (P-6) to Upper Insert (P-4)
using 2 C-Clamps (P-9) and 4 Flat Head
screws (A) as shown in illustration # 3.
8. Attach 2 Security Stops (P-11) using 4 Wood
screws (F).
4. Attach Lower Printer Shelf (P-7) to the
Lower Receiver (P-1), using 2 Flat Head
screws (D) and 1 Flat Head screw (B) as
shown in illustration # 2.
(Tighten all screws securely)
P-7
Illustration # 2
Illustration # 3
P-3
P-2
C
Attach Left Foot (P-3) on
the end of Lowe Reciever
(P-1) with drill hole.
Drill Hole
H
J
P-1
P-1