3
1.)
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
Assembly Instructions
Illustration # 2
2.)
.
.
.
Identify and Seperate all the parts to your new Workstation.
Loosen the two Allen Recess Screws in the rear section of the Support Post’s (P2) table
clamp. Next, loosen the two Allen Recess Screws in the top section . Slide the Support
Post (P2) onto the back of the table you will be using. Tighten the two top Screws (E)
using Allen Wrench (C) untill the Support Post is firmly in place. Tighten the two Screws (F)
in the rear of the clamp to lock the unit in place. See illustration #2.
P2
Your
Table
Top
Screws
Rear
Screws
3.)
Illustration # 1
Slide the Mount Bar (P5) under the clamp section of the Support Post (P2). Loosely attach
using two Screws (F) and two Screws (E) as shown in illustration #1.
F
P2
E
P5
