R
R
Model BRS-2T-24 Voltage Regulator
Operating Instructions
Page 2
The BRS-2T-24 can be adjusted to provide single stage voltage
control ranging from 26.5V TO 29.5V). The voltage adjustment pot,
as shown in the illustration, provides adjustability. To increase or
decrease charging voltage:
1. With the batteries fully charged, start the engine and allow the
charging voltage to rise to its preset limit.
2. When the charging voltage reaches its target, use the voltage
adjustment pot to increase or decrease maximum charging
voltage to its desired level. Turn the pot clockwise to increase
maximum charging voltage. Turn counterclockwise to reduce
maximum voltage.
ADJUSTING CHARGING VOLTAGE
TROUBLESHOOTING REGULATOR
WARRANTY
NO OUTPUT - Regulator must have battery voltage at RED and BROWN
wires to operate properly. Check voltage at those wires to ensure voltage
is present when engine is running. RED wire includes a 10-amp fuse
inline. Check fuse.
VOLTAGE TOO HIGH - Regulator must sense battery voltage accurately to ensure proper voltage control. Check for
differences in voltage at the batteries and on the RED wire at the regulator. If voltage shown is lower at the
regulator. Check for and correct voltage drop in wiring.
BALMAR warrants to the original consumer/purchaser the product is free from any defects in material or workmanship for a period of one year from the
date of purchase. If any such defect is discovered within the warranty period, BALMAR will replace the regulator free of charge, subject to verification of the
defect or malfunction upon delivery or shipping prepaid to BALMAR.
This warranty DOES NOT apply to defects or physical damage resulting from abuse, neglect, accident, improper repair, alteration, modification, or
unreasonable use of the products resulting in breakdown, cracked or broken cases nor are parts damaged by fire, water, freezing, collision, theft, explosion,
rust, corrosion or items damaged in shipment in route to BALMAR for repair. BALMAR assumes no responsibility for consequential damage or loss or
expense arising from these products or any labor required for service or repair.
BALMAR WILL NOT repair or be held responsible for any product sent without proper identification, return address and Return Authorization (RA) number
clearly marked on the package. You must include proof of date and place of purchase (photocopy of purchase invoice) or we cannot be responsible for
repairs or replacement. In order to expedite warranty claims more efficiently, BALMAR asks that prior to returning a defective product for repair, you call
BALMAR's Customer Service department for a warranty return authorization number.
If factory service is required, you can contact our BALMAR Customer Service Department Monday through Thursday, 7:30 AM to 5:30 PM, (PST)1-360 435-
6100 ext 2.
Material required for the repair or replacement for the defective part or product is to be supplied free of charge upon delivery of the defective regulator to
BALMAR, 18930 59th Ave. NE, Arlington, WA 98223. Customer is responsible for all return transportation charges and any air or rush delivery expense.
BALMAR reserves the right to determine whether to repair or replace defective components. Returned warranty or non-warranty items deemed non-
repairable will be disposed of after 30 days, unless claimed by owner. Balmar is not liable for damage to or loss of returned items.
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS. NO PERSON,
AGENT, DEALER IS AUTHORIZED TO GIVE ANY WARRANTY.
BALMAR 18930 59th Ave. NE, Arlington, WA 98223 Ph: (360) 435-6100, Fax; (360) 435-3210 E-mail: [email protected], Web: www.balmar.net
FIELD
Blue
STATOR
Orange
ORANGE
Stator Active
YELLOW
Field Active
GREEN
Power On
POWER
Red
IGNITION
Brown
GROUND
Black
Voltage
Adjustment
Pot
NOT
USED
