Fo-5502
UGDM Board DIP Switch Options
The
DIP
Switches
are on the UGDM Board at location SW2.
The
fol lowing
DIP
switches
have assigned functions. See Section
�
MAINTENANCE AND
REPAIR
under
Replace Printed Circuit Boards In your Operator Instructions Manual.
DIP
Swl tch
Option
--
1
ON
Pay schedule condensed to leave
room for animation
OFF
Standard size pay schedule
2
ON
Tlck:et amount
appears
In do I lars
(U. S. only)
OFF
No tlck:et amount appears
4
ON
Win
amount
appears
In
do I lars
(U. S. only)
OFF
Win
amount appears In
number of coins
Black:Jack: DIP Switch Options
The
DIP switches on the MPU board at location SW2 are not used with
black:Jack:,
so their settings have no effect on the game.
Initialize Keypad Options
Use the k:eypad to Initialize options for the availabl e commands.
To
Initialize
or check: an option, fol low these steps:
1 . The
machine
must be
In
the
Game Over state.
2. The credit meter must show "0"
credits
before
opening
the
door.
3. Open
the lower machine door.
4. Connect
the
k:eypad
to
the
back:plane at J14.
5. Press
"GAME"
and
the
Diagnostic menu appears.
6. Press
"06"
to
select
the
" OPTIONING"
Item on the
Main
Diagnostic Menu.
OPTIONS
ENTER COMMAND: 08
COLOR SELECTION
OPTION:
SETTING: 01
7. Press
the
command
numbers
for
the
desired
command.
See
KEYPAD
COMMAND/OPTION TABLE
In your Operator Instructions Manual. The command, Its
number, and the presently set option number appear.
8. If
the
option
setting Is correct, press " KEYBD/CLR"
to
return
to
the
OPTIONS menu.
9. To
change
the
option,
press the option
numbers.
They
appear
beside
"OPTION:" on the screen.
10. Press "ENTER".
The new option numbers appear beside "SETTING:".
11. Press another command number or "KEYBD/CLR" to continue.
To
return
to the Game Over state, press "GAME" twice, remove
the
k:eypad,
or
close the door.
NOTE:
Check: that the option settings and the machine's display glass match.
8