www.balluff.com
2
BAM LS-VS-008-C2/3-_ _ _ _-5
Ruggedized Waterproof Lens
Fixing
Once the iris plate and focus have been determined, it is
recommended to apply adhesive to prevent them from
loosening.
Iris unit
1.
Remove any oil or dirt from the screw parts on the front
lens unit and inside the main body unit shown in the
diagram below.
Do not wipe the O-ring parts with solvents.
2.
Apply screw loosening prevention adhesive agent
(ThreeBond 1401 or equivalent) to the screw parts on
the front lens unit and inside the main body unit as
shown in the diagram below, then tighten them.
Focusing unit
1.
After matching the focus, loosen the locking ring by
turning it to the limit in the NEAR direction.
2.
Apply the loosening prevention adhesive agent all
around the screw part (see the diagram below) which
has appeared from below the loosened locking ring.
3.
Turn the locking ring in the FAR direction to tighten it.
No. 947571-726 EN ∙ 00.000000 · E20; Subject to modification.
MATRIX VISION GmbH
Talstrasse 16
71570 Oppenweiler
Germany
Tel. +49 7191 9432-0
Fax +49 7191 9432-288
www.matrix-vision.com, www.balluff.com
english
How to use (continued)
Adhesive agent
application area
Adhesive agent
application area
