11
– Rugged housing
– Convenient setting via IO-Link
– Highly visible light spot for ease of alignment
– Comprehensive parameter setting options
Installation
Wiring diagramm
Safety Notes
These photoelectric sensors may not be used in
applications where personal safety depends on
proper function of the devices (not safety
designed per EU machine guideline). Read
these operating instructions carefully before
putting the device into service.
The CE Marking confirms that our products
conform to the EC Directives 2004/108/EEC
(EMC) and the EMC Law.
In our EMC Laboratory, which is accredited by
the DATech for Testing of Electromagnetic
Compatibility, proof has been documented that
these Balluff products meet the EMC require-
ments of the harmonized standard EN 60947-5-2.
Display Elements
Yellow LED light reception / stability indicator
LED on: Light at the receiver
LED flashes: Unreliable range
Caution!
Do not stare into the light beam.
Fig. 1: Dimensions
Fig. 2: Connection diagram, pinouts
Caution!
Red light beam!
Glare and irritation of the eyes.
DO NOT LOOK INTO THE LIGHT BEAM!
The sensor must be installed as to prevent a direct line of
eyesight to the light source, even during operation.
No additional protective measures are necessary for opera-
tion (Exempt Group according to EN 62471:2009).
Order code Diffuse reflective with background supression and IO-Link
BOS0246
BOS 08E-PI-KH22-00,2-S49
Cable with connector
BOS0247
BOS 08E-PI-KH22-S49
Connector
Application
Only for NFPA 79 applications (machines with a supply
voltage of max. 600 volts). Device shall be connected only
by using any R/C (CYJV2) cord, having suitable ratings.
Photoelectric Sensors
Red light diffuse reflective BOS 08E-PI-KH22-... with background supres. and IO-Link
