Balluff BNI IOL-314-S52-P012, User Manual

Page: 44 / 114

20 english
The specifications are typical values for 24 V DC at room
temperature.
The module is fully operational immediately, with full
accuracy after warm-up.
Performance data for UL section 10.7.2 on
page 21.
Further data can be found at www.balluff.com
on the product page.
10.1 Ambient conditions
Ambient temperature −25…+70 °C
Storage temperature −25…+70 °C
Protection class
(in screwed state)
IP68, IP69K
10.2 Electrical data
Supply
Supply voltage U
S
18…30.2 V DC
Supply voltage U
A
12…30.2 V DC
Voltage ripple (supply voltage) < 1%
Power consumption without
load at U
S
= 24 V
40 mA
Digital I/O properties
Input Type 1, Type 3
1)
Input frequency
2)
200 Hz
Output current
3)
BNI IOL-…-P012 ≤ 2 A
BNI IOL-…-P071 ≤ 4 A with derating
4)
Total output current
BNI IOL-…-P012 ≤ 4 A
BNI IOL-…-P071 ≤ 16 A
Sensor supply output current
(Pin 1)
≤ 200 mA
10.3 Electrical connection
IO-Link interface/port M12, A-coded, 4-pin,
plug
Auxiliary voltage connection
5)
M12, L-coded, 5-pin,
plug
Input/output ports 8 × M12, A-coded,
5-pin, socket
10.4 Interface
IO-Link version 1.1.2
Data transmission rate COM3 (230.4 kBit/s)
Minimum cycle time 2 ms
Process data length
Input 12 Byte
Output 2 Byte
10.5 Materials
Housing material Plastic (PPS)
10.6 Mechanical features
Installation 2-hole screw mounting
Ground strap fastening Screw M4
Dimensions (W × H × D) 68 × 183.5 × 36.8 mm
Weight Approx. 430 g
1)
As per IEC 61131-2
2)
Although the counter can count at this frequency, the IO-Link is not able
to transfer such a fast change. The frequency of the signal that can be
transmitted via IO-Link depends on the actual cycle time.
3)
Outputs are overload and short circuit-resistant
4)
For information on derating, see section 5.4 on page 15
5)
Only on BNI IOL-…-P071
10
Technical data
BNI IOL-314-S52-P012 / BNI IOL-314-S52-P071
Network interface – Digital hub