Balluff Network Interface / IO-Link BNI IOL-
….. -Z0xx
www.balluff.com
2
1
Notes for the user
1.1.
About this guide
This guide describes the Balluff Network Interface BNI IOL-
…-Z0xx for the application as
peripheral output module to establish connection of binary actuators. Hereby it is about an
IO-Link device which communicates by means of IO-Link protocol with the superordinate
IO-Link master assembly.
1.2.
Structure of the
guide
The guide is organized so that the sections build on one another.
Section 2: Basic safety information.
Section 3: The main steps for installing the device.
Section 4: IO-Link, parameter and process data for the device.´
Section 5: Technical data for the device.
……..
1.3.
Typographical
Conventions
The following typographical conventions are used in this guide.
Enumerations
Enumerations are shown in list form with bullet points.
Entry 1,
Entry 2.
Actions
Action instructions are indicated by a preceding triangle. The result of an action is indicated
by an arrow.
Action instruction 1.
Action result.
Action instruction 2.
Syntax
Numbers
:
Decimal numbers are shown without additional indicators (e.g. 123),
Hexadecimal numbers are shown with the additional indicator
hex
(z. B. 00
hex
).
Cross references
Cross references indicate where additional information on the topic can be found.
1.4.
Symbols
Note!
This symbol indicates a security notice which must be observed.
Note, Tipp
This symbol indicates general notes
1.5.
Abbreviations
BNI
DPP
EMV
FE
IOL
SPDU
Balluff Network Interface
Direct Parameter Page
Electromagnetic Compatibility
Function Earth
IO-Link
Service Protocol Data Unit
