Balluff BMP 01-ZLZPP 1A 00-P S75 Series, User Manual

Page: 64 / 292

30 english
Accessories are not included in the scope of delivery and
must be ordered separately.
9.1 Mounting Set for T-Slot
(BAM MC-MP-056-01-2-T5)
Order code:
BAM0383
– 2 T-slot nuts
– 2 screws
Fig. 9-1:
2x
2x
2x
2x
10x
T-Slot mounting set
9.2 Mounting set for C-Slot
(BAM MC-MP-056-01-2-C3)
Order code: BAM0382
– 2 C-slot nuts
– 2 screws
Fig. 9-2:
2x
2x
2x
2x
10x
C-Slot mounting set
9.3 Mounting screws (BAM MC-AM-055-056-2)
Order code: BAM0381
10 screws
Fig. 9-3:
2x
2x
2x
2x
10x
Mounting screws
9.4 Holders for round cylinders
(BAM MC-MP-054-01-R)
Order code: BAM037Z
2 holders for round cylinders
Fig. 9-4:
22.5
14.4
6.5
9.5
Holder for round cylinder
9.4.1 Hose clamps for attaching the holder
The hose clamp may have a maximum width of 6 mm and
must be produced from non-ferromagnetic material.
Fig. 9-5: Hose clamp
Piston
diameter
Hose clamp
Width Diameter Order code
10/20 mm 5 mm 18…29 mm
BAM00N4
30 mm 5 mm 28…39 mm BAM00N5
40 mm 5 mm 38…49 mm BAM00N6
50 mm 5 mm 48…59 mm
BAM00N7
Tab. 9-1: Hose clamps for corresponding piston diameter
9
Accessories
BMP 01-ZLZPP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System