Balluff BMP 01-EL1PP 1A Series, User Manual

Page: 17 / 32

www.balluff.com 17 english
7.1 Communication parameters
In Tab. 7-1, the basic IO-Link specification for standard
variant BMP 01-… is described.
Specification IO-Link Description Value
Transmission rate COM3 230.4 kBaud
Minimum cycle time of device MinCycleTime 1 ms (0x0A)
Frame specification:
– Amount of preoperate data required
– Amount of operate data required
– ISDU M-Sequence Capability:
– M-Sequence Type Preoperate
– M-Sequence Type Operate
– ISDU supported 0×19
2 bytes
1 Byte
Supported
IO-Link protocol version Revision ID 0x11 (Version 1.1)
Amount of process data from the device to the master ProcessDataIn 6 byte (0xC5)
Amount of process data from the master to the device ProcessDataOut 0 byte (0x00)
Manufacturer ID Vendor ID 0x0378
Device identification Device ID 0x0D0101
IO-Link profile Profile Smart sensor profile Ed 2
(digital measuring sensor)
IO-Link profile type Profile Type SSP 3.2
Tab. 7-1: BMP device specification
The minimum cycle time of the BMP is 1 ms.
The master can increase the cycle time as
necessary, and as a result, the cycle time
actually used (mastercycletime) depends on the
master.
7
IO-Link interface
BMP 01- EL1PP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System