Balluff BIS M-4008-048-0 ST4 PROFINET Series, Operating Manual, Page: 73 / 232

www.balluff.com
BIS M-4008-048-0xx-ST4
PROFINET
25
Status codes
Note
Status codes are only valid in connection with the AF bit!
Status code Function description
00
hex
Everything OK
01
hex
Job cannot be run because there is no data carrier in range of the read/write
head.
02
hex
Cannot read the data carrier.
04
hex
Cannot write to the data carrier.
05
hex
Data carrier was removed from the R/W head's range during writing.
07
hex
No or invalid command designator with set AV bit or the number of bytes is
00
hex
.
09
hex
R/W head cable break or no R/W head connected.
0D
hex
Communication to the R/W head disrupted.
0E
hex
CRC for the read data and CRC for the data carrier do not agree.
0F
hex
1st and 2nd bit string are unequal. The 2nd bit string must be used.
20
hex
Address assignment of the read/write job is outside the memory range of the
data carrier.
21
hex
This function is not possible for this data carrier.
Description of the Code Present (CP) and Multiple Tag (MT) bits
CP MT Meaning
0 0 No tag in the field
1 0 Exactly one tag in the field. Automatic reading is OK (if configured).
0 1 More than one data carrier is in the field. They cannot be processed.
1 1 Does not occur.
7
Device Function