Balluff BIS M-4008-048-0 ST4 PROFINET Series, Operating Manual, Page: 62 / 232

BIS M-4008-048-0xx-ST4
PROFINET
14
Balluff data carrier type Memory capacity Usable bytes for CRC_16
BIS M-1_ _- 02 2000 bytes 1750 bytes
BIS M-1_ _- 03 112 bytes 98 bytes
BIS M-1_ _- 04 256 bytes 224 bytes
BIS M-1_ _- 05 224 bytes 196 bytes
BIS M-1_ _-06 288 bytes 252 bytes
BIS M-1_ _- 07 992 bytes 868 bytes
BIS M-1_ _- 08 160 bytes 140 bytes
BIS M-1_ _-
09
32 bytes 28 bytes
BIS M-1_ _- 11 8192 bytes 7168 bytes
BIS M-1_ _- 13 32786 bytes 28672 bytes
BIS M-1_ _-
14
65536 bytes 57344 bytes
BIS M-1_ _- 15 131072 bytes 114688 bytes
BIS M-1_ _-17 208 bytes 182 bytes
BIS M-1_ _- 20 8192 bytes 7168 bytes
As soon as the ( Dynamic mode ) function is enabled, the compact processor unit accepts the
read/write job from the controlling system and stores it, regardless of whether a data carrier is in
the active zone of the R/W head or not. If a data carrier enters the active range of the R/W head,
the stored job is run.
If this function is enabled, the type of the read/write head as well as the data carrier type and
serial number (UID = Unique Identifier) for the data carrier are output when CP occurs.
For this option, the antenna on the read/write head is switched on for data carrier detection only
every 200 ms. The parameters for this function are configured in the respective read/write head
module.
The connection of a BIS V-4008 to a Siemens S7 controller is shown using “SIMATIC Manager”.
The exact procedure depends on the project planning software used.
To perform project planning on the PC, the GSD file for the module must be installed:
►
Open a new project.
►
Open hardware configurator.
►
Select the “Tools | Install new GSD” menu command.
⇒
An “Install new GSD file” dialog will appear.
►
Select directory and GSD file.
⇒
The [Install] button only becomes active if a GSD file is selected.
►
Click on [Install].
⇒
The GSD file is installed.
⇒
A message appears once the process has finished.
Dynamic mode
Type serial
number
Slow tag
detection
6.3 Integration into
Project Planning
Software
Installing the
GSD file
6
Commissioning