Balluff BIS L-87, Quick Manual

Page: 12 / 24

Handheld Programmer
BIS L-87_
12
Getting Started
3
The "Settings"
tab cont.
Supported data
carrier types
The following settings can be made:
CodeTag Type
Selection of the data carrier type. All or one particular data carrier type may be selected.
All All Balluff supported data carrier types are processed (factory default setting).
BIS L-1xx Only BIS L-1xx data carrier types are processed
BIS L-2xx Only BIS L-2xx data carrier types are processed
Use CRC Check
Uses the CRC checksum. If the CRC data check is activated, the validity of the data is ensured
using a CRC checksum (
see also "Data integrity" in Section 4 "BasicKnowledge", starting on
page 18 ).
If the CRC data check is not activated, the validity of the data is checked using a double read.
Sounds
Setting an audio signal for a read error ("on Error") or successful reading ("on Success").
UID Format
Setting the display format of the serial number.
The serial number can be displayed in "Hex" (hexadecimal), "Dec" (decimal) or "ASCII" format.
Continuous Read
Continuous Read.
If this option is enabled, read requests are carried out automatically at the set interval.
[Open Reader]
Activating the read/write head.
The read/write head is activated with the settings made and the options are grayed out. The
label on the button changes to
"Close Reader" .
Go to the "RW Data" tab to perform read or write operations.
[Close Reader]
Deactivate the read/write head. The settings are enabled for editing.
Following data carrier types can be processed with the BIS L-870:
BIS L-100-01/L BIS L-103-05/L BIS L-202-03/L
BIS L-101-01/L BIS L-200-03/L BIS L-203-03/L
BIS L-102-01/L BIS L-201-03/L
A BIS L-871 is required to process the following data carriers:
BIS L-150-05/A BIS L-151-05/A
A BIS L-873 is required to process the following data carriers:
BIS L-222-03/L BIS L-245-03/L
BIS L-244-03/L
You can obtain more detailed information upon request.