Handheld Programmer
BIS L-87_
10
3.3
COLD RESET or
battery
replacement
Saving your own
profile with "Total
Recall"
3.4 Turning
the
Handheld
Programmer on/
off
Turning on
Turning off
3.5 Keyboard,
display
and operating
concept
3.6 Creating
your
own operating
interface
Note
Removing the battery pack or performing a cold reset will delete data, drivers and
settings form the RAM of the unit!
The program
"Total Recall"
can be used to save the personal profile so that it is
automatically loaded after a cold reset.
The program
"Total Recall"
is located in the
"Control Panel"
of the Workabout Pro.
To open the Control Panel: <Windows Start> - <Settings> - <Control Panel>.
–
Double-click on the program <Total Recall>
–
(or select it and in the upper left corner select <File> and <open>),
A new window opens; click on <Next> ; the following window is opened,
–
Change <Profile Name> to <BISM>,
–
Change <Profile Type> to <AutoRestore for this device only>,
–
Keep <Profile Location> (should be set to <Flash Disk>),
–
Click on <Next>,
–
<All Files> window opens. Do not change anything. Click on <Next>,
–
<View Selections> window opens. Do not change anything. Click on <Next>,
–
Click on <Backup>,
–
In the <Perform the Operation> window click on <Finish1> .
–
Requirements:
Supply voltage is present (battery pack used and charged, device is in the docking station of
–
power supply is connected).
Attention!
This is a Class A product. When using this product indoors, the device may cause RF
interference, requiring the user to take appropriate measures.
Hold down
►
<Enter>
for at least 1 second.
As soon as the green LED flashes, release the
<ENTER>
key.
The start screen <(Today)> will be displayed.
⇒
Note
If the device was used previously, it can happen that it is in Suspend mode; pressing
<ENTER>
reactivates the unit. The screen you were working in before the computer
switched to Suspend mode is displayed again.
– Suspend –
Press
►
<FN>
(blue) and then
<ENTER>
to shut off the WORKABOUT PRO
or
From the start menu select
►
"Shutdown > Suspend"
.
Familiarize yourself with the operating concept and characteristics of the WORKABOUT PRO.
The operating manual can be found
on the included CD.
The most recent documents are available in the Internet at:
http:// www.psion-teklogix.com/.
Note
The BALLUFF.dll was developed as an independent software for creating a custom
tailored operating interface, for the Handheld Programmer. The ordering code for this
application is available on demand.
Getting Started
3