77
77
english
Read times from
data carrier to
processor in
static mode
(parametering:
Operating_Mode
= 0,
no dynamic mode
,
without CRC_16 data
check)
The indicated times apply after the data carrier has been recognized. If the data carrier is not
yet recognized, an additional 45 ms for building the required energy field until the data carrier is
recognized must be added.
For double read and compare:
Data carrier with 32 byte blocks
Data carrier with 64 byte blocks
No. of bytes
Read time [ms]
No. of bytes
Read time [ms]
from 0 to 31
110
from 0 to 63
220
for each additional
32 bytes add
120
for each additional
64 bytes add
230
from 0 to 255
= 950
from 0 to 2047
= 7350
Including readback and compare:
Data carrier with 32 byte blocks
Data carrier with 64 byte blocks
No. of bytes
Write time [ms]
No. of bytes
Write time [ms]
from 0 to 31
110 + n * 10
from 0 to 63
220 + n * 10
for 32 bytes or more
y * 120 + n * 10
for 64 bytes or more
y * 230 + n * 10
n = number of contiguous bytes to write
y = number of blocks to be processed
Example: 17 bytes from address 187 have to be written. Data carrier with 32 bytes per block.
The blocks 5 and 6 will be processed since the start address 187 is in block 5 and the end
address 203 in block 6.
t = 2 * 120 + 17 * 10 = 410 ms
Write times from
processor to data
carrier in static
mode
(parametering:
Operating_Mode
= 0,
no dynamic mode
,
without CRC_16 data
check)
Read/Write Times
☞
C60_3-025_825645_1310_e.p65
78
english
78
Read times from
data carrier to
processor in
dynamic mode
(parametering:
Operating_Mode
= 1,
dynamic head1
,
without CRC_16 data
check)
Read times within the 1st block for dual read and compare:
The indicated times apply after the data carrier has been recognized. If the data carrier is not
yet recognized, an additional 45 ms for building the required energy field until the data carrier is
recognized must be added.
Formula: t = (m + 1) * 3.5 ms
Example: Read 11 bytes starting at address 9, i.e. the highest address to be read is 19.
This corresponds to 70 ms.
Read/Write Times
m = highest address to be read
Data carrier with 32 byte blocks
Data carrier with 64 byte blocks
No. of bytes
Read time [ms]
No. of bytes
Read time [ms]
from 0 to 3
14
from 0 to 3
14
for each additional
byte add
3.5
for each additional
byte add
3.5
from 0 to 31
112
from 0 to 63
224
