6
Startup
6.1 Calibration aid
For simple and safe installation the sensor has an optical setup aid
for visualizing the release zone.
BES057A:
30
0
> 5 s
mm
Signal
Power
The setup aid is activated by bringing the
metallic object in front of the safety sensor
(close zone).
After approx. 5 sec. the yellow Signal LED
starts to flash: The setup aid is activated.
While this mode is active the output stage
remains in the safe condition "0").
BES057C:
45
0
> 5 s
mm
Signal
Power
The setup aid is activated by bringing the
metallic object in front of the safety sensor
(close zone).
After approx. 5 sec. the yellow Signal LED
starts to flash: The setup aid is activated.
While this mode is active the output stage
remains in the safe condition "0").
BES0577:
30
0
> 5 s
mm
Signal
Power
The setup aid is activated by bringing the
metallic object in front of the safety sensor
(close zone).
After approx. 5 sec. the yellow Signal LED
starts to flash: The setup aid is activated.
While this mode is active the output stage
remains in the safe condition "0").
1
Close zone
2
Release zone
Figure 8 Activating the setup aid
24
BES M/Q…-D12 Inductive Safety Sensors
