WARNING
Never pull the tool clip down to the tool.
Always lift the tool up to the tool clip. If the
tool clip is released when extended without a
tool attached, it could snap back and cause
damage or injury.
BAM MD-VS-002-0004 Takeup Reel
SUP BVS-HS-P
Mounting Instructions
www.balluff.com
3
Operation
3.1
Tool Positioning
Attach tool complete with hose or cable and fittings. To
adjust length of overhang, remove all tension and position
hook at desired height. Loosen cable stop, slide cable stop
upward to cable guide and tighten. Lengthening overhang of
cable will reduce active travel distance. An extension cable
can be used to extend the overhang without reducing the
active travel.
3.2
Spring Tension Adjustment
Attach load before adjusting tension. If the tool attached to
the takeup reel cable descends freely, there is not enough
takeup reel mainspring tension Turn the tension knob
clockwise to increase tension. Ensure the knob ratchet
engages with housing before releasing knob. If the cable
stop is tight against the cable guide, there is too much
tension on the takeup reel mainspring. To decrease tension
pull tension knob out and turn counterclockwise ensuring
teeth engagement before releasing knob.
CAUTION
Failure to hold knob firmly when detensioning
could result in rapid rotation of knob and
damage to internal components.
After adjusting tension, extend cable to full stroke. If full
stroke is not achieved (after allowing for overhang
adjustments), tension must be relieved. If proper tension and
extension cannot be achieved, consult the factory.
WARNING
Do not disassemble this unit. Opening this
unit could result in property damage, serious
injury or death. For service, consult factory.
World Headquarters
Germany
Balluff GmbH
Schurwaldstraße 9
73765 Neuhausen a.d.F.
Deutschland
Tel. +49 7158 173-0
Fax +49 7158 5010
[email protected]
Subsidaries
USA
Balluff Inc.
8125 Holton Drive
Florence,
Kentucky 41042-0937
Phone (859) 727-2200,
1-800-543-8390
[email protected]
4
Service
www.balluff.com
No
. 922
290
EN
·
F
15; Su
bject to modification
.
