BAM MD-VS-001-x
Base Station/Charger
2
Installation
5
www.balluff.com
2
Installation
To set up the base station cradle you must:
1
Physically install the cradle.
2
Make all system connections.
3
Configure the cradle.
2.1
Mounting the BAM MD-VS-001-x Cradle
The cradle package contains the following items:
The cradle can be either mounted on a flat surface for desktop usage or affixed vertically to
a wall.
2.1.1
Mounting Brackets
The cradle comes with two different mounting brackets. The appropriate bracket is used
depending on whether the cradle will be mounted on a horizontal or vertical surface. When
shipped, the cradle has the Desktop Mounting Bracket installed. For vertical installation, the
Wall Mounting Bracket must be attached instead.
Figure 1:
Mounting Brackets
- Desktop mount bracket has ribs to keep the scanner in place when the cradle is hori-
zontal
- Wall mount bracket contains bosses to keep the scanner in place when the cradle is
vertical.
• Base Station (with Desktop Mounting
Bracket installed)
• 1 Metal Mounting plate
• Quick Reference Guide (this manual)
• 1 Wall Mounting Bracket
A
Tabs
B
Ribs
C
Bosses
Desktop Mounting Bracket
Wall Mounting Bracket
B
C
(Horizontal)
(Vertical)
A
A
A
