BAM MD-VS-001-x
Base Station/Charger
2
Installation
10
2.1.4
System Connections
The cradle provides a multi-interface connector and a power supply connector as shown:
2.1.5
Connecting and Disconnecting the Interface Cable
The can be connected to a Host by means of a multi-interface cable, which must be simply
plugged into the Host connector, visible on the front panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the hole correspond-
ing to the Host connector on the body of the cradle (shown below). Push down on the clip
while unplugging the cable. Refer to the following figure:
CAUTION
Connections should always be made with power off!
Power Supply
Multi-Interface Connector
Power
Interface
Emulation to Host
Connecting/Disconnecting the Cable
