Balluff BAE010H, User Manual

Page: 25 / 52

25
Continuation „
Preselection 1 Menu
“:
PULSE TIME 1 (S)
Duration of output pulse for the switching condition of preselection 1
0,000 No output pulse (static signal)
…
60,000
Pulse duration of 60 seconds
OUTPUT TARGET 1
Assignment of an output or relay for the switching condition of preselection 1.
If more than one switching condition is assigned to one output / relay, the output is set when at least
one switching condition is true
0 NO No assignment
1 CTRL OUT 1 Switching cond
ition assigned to “Ctrl. Out 1”
2 CTRL OUT 2
Switching condition assigned to “Ctrl. Out 2”
3 CTRL OUT 3
Switching condition assigned to “Ctrl. Out 3”
4 CTRL OUT 4
Switching condition assigned to “Ctrl. Out 4”
5 RELAY 1
Switching condition assigned
to “Rel. 1”
6 RELAY 2
Switching condition assigned to “Rel. 2”
OUTPUT POLARITY 1
Polarity for the switching condition of preselection 1
0 ACTIVE HIGH
Switching condition is true

Active „HIGH“
1 ACTIVE LOW
Switching condition is true
 Active „LOW“
OUTPUT LOCK 1
Latch for the switching condition of preselection 1
0 NO No latch for preselection
1 YES Latch for preselection (command LOCK RELEASE will clear latch)
START UP DELAY 1 (S)
Start-up suppression for the switching condition of preselection 1.
This adjustment is only valid for the switching condition |RESULT|<=|PRES| or RESULT<=PRES
(Start Up Delay 3 and 4 have an automatic start up suppression).
0.000 No start-up suppression
…
60.000
Start-up suppression in seconds
EVENT COLOR 1
Event-depending change of the display color for the switching condition of preselection 1.
EVENT COLOR 1 has the lowest priority. EVENT COLOR 2 … 4 are allowed to overwrite this color
change.
0 NO CHANGE No color change.
1 CHANGE TO RED Color change to red
2 CHANGE TO GREEN Color change to green
3 CHANGE TO YELLOW Color change to yellow